VG-TX2-MM-VGA-ISA | Two-port analog video, audio & RS-232 transmitter

Image Detail

Overview

The two-port Voyager VGA transmitter accepts any type of analog video (RGBHV, component, s-video or composite) as an input. Regardless of the video input type utilized, the output will be converted to a crisp 1080p digital signal for use with a Voyager HDMI or DVI receiver.

The VG-TX2-MM-VGA-ISA also handles analog audio and duplex (two-way) RS-232 siganls. Additionally, the analog audio input can be infused, using Magenta's MaGUI software, into the HDMI output stream (if an HDMI Voyager receiver is utilized).

One multimode fiber-optic module is included with the unit. A second module can also be ordered to cascade to a second Voyager transmitter (increasing distribution options).

Singlemode fiber optic modules supporting longer distances (4KM and 30KM) are also available from Magenta.

A power supply is also included.

Downloads for VG-TX2-MM-VGA-ISA | Two-port analog video, audio & RS-232 transmitter

Manual
 

Description

• Two duplex fiber output ports (VG-TX2)
• Analog to digital (1080p) video conversion
• Analog audio and RS-232
• Distance range of up to 18.75MI/30KM determined by receiver
• Singlemode or multimode fiber support
• Advanced EDID management and HDCP compliance
• Local video output (VGA)

Product Functionality Part number
VG-TX2-MM-VGA-ISA Two-port VGA Transmitter with audio and duplex RS-232 2310008-01

 

Specifications

Item Description
DC input power Provided by the CORE module. However, power consumption of this module alone is approximately 1.5 watts.
Video Support

Video input formats (video input port):
•  Maximum resolution supported = 1920x1080.
•  Maximum color-depth = 24 bits per pixel (8 bits per color).
•  Maximum refresh rate = 60Hz @ 1920x1080, 75HZ @ 1152x864.

Video output formats (local VGA output port only):
The local output port is essentially a direct copy of the VGA video input port. There are no local output ports for the non-VGA analog signals.
Connectors (1) VGA-input (HD-15F)
(1) VGA-output (HD-15F)
(1) S-Video input (6pin MiniDIN)
(1) Composite video input (RCA phono)
(3) Component video inputs (RCA phono)
(1) CORE docking connector
Serial Interface RS232 standard serial interface. Reflects DCE pinout standard.
Signals: TXD, RXD, RTS, CTS, DSR, DTR, DCD and RI.
Speeds: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400
Baud.Format: 8 data. 1 or 2 stop bits. no parity bit.
Flow control: Hardware and software flow-control is available, configurable on/off.
Connector: DB9-Female, w/4-40 standoffs.Note: Speed and data format are software-configurable via MAGui.
Note: The ISA hardware is capable hardware and software (Xon/Xoff) handshaking. However, this capability is not yet enabled by the firmware. Check with Magenta Research for applicable firmware updates.
Audio interface Discrete Left and Right line-level audio.
This module can function as an input (for TX) or output (for RX) device. The audio signal direction is under software control, and is selected automatically by the type of CORE module being used.
Audio-input mode (when used with VG-TX2 CORE):
Input voltage: 2V peak-to-peak, maximum.
Input impedance: >= 10K ohms.
Input coupling: AC (capacitive).Input sample rate: 48KHz
Input frequency response: 20-20KHz, (@-3dB).
Audio-output mode (when used with VG-RX CORE):
Output voltage: 2V peak-to-peak, maximum.
Output impedance: <= 100 ohms.
Output coupling: AC (capacitive).
Output sample rate: 48KHz
Output frequency response: 20-20KHz, (@-3dB).
Connector: 3.5mm (1/8”) stereo-phono type jack.
System Size
Assumes a typical 2-module configuration consisting of:
VIDEO + CORE modules, docked together:
1.75"(4.45cm)H x 5.5"(13.967cm)W x 5.25"(13.33cm)D
Weight: 1.4lbs (.635kg)
EDID/DDC This module supports the EDID/DDC connections on the VGA input connector.
MTBF 100,000 hours.