VG-RX-MM-DVI-ISA | Two-port DVI/HDMI, audio & RS-232 receiver with HDCP

Image Detail

Overview

The two-port Voyager DVI/HDMI reciever accepts DVI or HDMI video through its DVI input. HDCP-protected video is supported as is two-way (duplex) RS-232. The VG-RX-MM-HDMI is rated for 1920x1200 uncompressed video signals, to distances of 6,600 feet over multimode fiber.

One multimode fiber-optic module is included with the unit. A second module can also be ordered to daisy-chain to a second Voyager receiver(increasing distribution options). Up to 10 (or more, depending on distance and the specific type of fiber being used) Voyager receivers can ultimately be daisy-chained together.

Singlemode fiber optic modules supporting longer distances (4KM and 30KM) are also available from Magenta.

A power supply is also included.

Downloads for VG-RX-MM-DVI-ISA | Two-port DVI/HDMI, audio & RS-232 receiver with HDCP

Manual
 

Description

• Singlemode or multimode fiber
• Uncompressed multi-format video at 1920x1200
• Multi-format audio & RS-232
• Daisy-chain capability with full bidirectional signal support
• Advanced EDID management and HDCP compliance

Product Functionality Part number
VG-RX-MM-DVI-ISA Two-port DVI Receiver with HDCP, audio and duplex RS-232 2320009-01

 

Specifications

Item Description
DC input power Provided by the CORE module. However, power consumption of this module alone is approximately 0.5 watts.
Video Support Video output formats:
• Maximum resolution supported = 1080p or 1920x1200.
• Maximum color-depth = 24 bits per pixel (8 bits per color).
• Maximum refresh rate = 60Hz @ 1920x1200.
Audio Characteristics This module automatically provides embedded digital audio (if audio is available at the source). * For analog-audio output, please use the ISA auxiliary module.
Connectors (1) DVI-output, (1) CORE docking connector
EDID/DDC This module supports the EDID/DDC connections on the DVI connector.
HDCP Version 1.1. Classification: HDCP Repeater Device
CEC The HDMI "CEC" interface protocol is not currently supported.
Note: The hardware is capable. A future firmware upgrade may enable this functionality.
Environmental Operating temperature: 32 to 104°F (0 to 40°C).
Storage temperature: -4 to +140°F (-20 to +60°C).
Humidity: 80% RH, non-condensing.
Enclosure Steel (0.040”/1mm thick).
Powder-coat black paint, white epoxy graphics.

Serial Interface

RS232 standard serial interface. Reflects DCE pinout standard.
Signals: TXD, RXD, RTS, CTS, DSR, DTR, DCD and RI.
Speeds: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 Baud.
Format: 8 data. 1 or 2 stop bits. no parity bit.
Flow control: Hardware and software flow-control is available, configurable on/off. t
Connector: DB9-Female, w/4-40 standoffs.
Note: Speed and data format are software-configurable via MAGui.
t The ISA hardware is capable hardware and software (Xon/Xoff) handshaking. However, this capability is not yet enabled by the firmware. Check with Magenta Research for applicable firmware updates.

Audio interface

Discrete Left and Right line-level audio.
This module can function as an input (for TX) or output (for RX) device. The audio signal direction is under software control, and is selected automatically by the type of CORE module being used.
Audio-input mode (when used with VG-TX2 CORE):
Input voltage: 2V peak-to-peak, maximum.
Input impedance: >= 10K ohms.
Input coupling: AC (capacitive).
Input sample rate: 48KHz
Input frequency response: 20-20KHz, (@-3dB).
Audio-output mode (when used with VG-RX CORE):
Output voltage: 2V peak-to-peak, maximum.
Output impedance: <= 100 ohms.
Output coupling: AC (capacitive).
Output sample rate: 48KHz
Output frequency response: 20-20KHz, (@-3dB).
Connector: 3.5mm (1/8”) stereo-phono type jack.
System Size Assumes a typical 3-module configuration consisting of
VIDEO + CORE + AUX modules, docked together:
1.75"(4.45cm)H x 7.75"(19.68)W x 5.25"(13.33cm)D
Weight: 2.2lbs (1kg)
MTBF 100,000 hours.