MultiView XRTx-SAP

MultiView XRTx Transmitter

Overview

Discontinued, please use the MultiView II XRTx-SAP as a replacement.

Downloads for MultiView XRTx-SAP

 

Specifications

  Connectors Required
  -A -S -232 -SA -SAP
Video In HD15-F HD15-F HD15-F HD15-F HD15-F
Video Out HD15-F HD15-F HD15-F HD15-F HD15-F
Audio In 4-pin Phoenix -   4-pin Phoenix 4-pin Phoenix
Audio Out - - - - -
Serial In
4-pin Phoenix
(replace audio-in)
4-pin Phoenix DB9F DB9F DB9F
Serial Out - - - - -
UTP In - - - - -
UTP Out RJ-45 RJ-45 RJ-45 RJ-45 RJ-45
General Specifications
Video Support All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p
Resolution/Refresh Rate MultiView Receiver Dependent
Required Source Impedence Video Out: 75 Ohms; Audio Out (if applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms
Required Destination Impedence Video In: 75 Ohms; Audio In (If applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms
  -A -S -232 -SA -SAP
Audio Support Left/Right Summed or SPDIF (field config.) - - Stereo Audio Stereo Audio
Line Level 600 Ohm Unbalanced - - - -
Serial Support -
Transmit
Only
(data rates to 115kbps)
Duplex
(data rates to 19.2 kbps)
Duplex
(3 wire, fixed baud rate 9600)
Addressable Duplex
(3 wire, fixed baud rate 9600)
Cable Supported
Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP) 
or skew-free cable. Please see the "Recommended UTP" page for more detailed information.
Cascading Capability Yes, Video Only
Compliance CE; FCC Class A, IC Class A, RoHS
Power +5 VDC, Consumption 5 Watts Maximum
Temperature Tolerance Operating: 32 to 104°F (0 to-40°C)    Storage: -4 to 140°F (-20 to 60°C)  
Humidity Tolerance Up to 80% Non-Condensing
Mounting Rack Mount Standard/Wall Mount Optional
Enclosure Steel
Size 1.2"H x 4.2"W x 4.3"D (3.0 x 10.7 x 10.9 cm)
Weight 1.0 pound (0.45 kg)
Skew Compensation Not Applicable on Transmitters