MultiView T4 Four Port Transmitter

With MultiView-A and MultiView-S Functionality


Discontinued, please use the MultiView II T4 as a replacement.

Downloads for MultiView T4 Four Port Transmitter



Connectors Required
  -A -S -232 -SAP
Video In HD15-F HD15-F    
Video Out HD15-F HD15-F    
Audio In 3.5mm      
Audio Out 3.5mm      
Serial In   DB9F    
Serial Out        
UTP In        
UTP Out RJ-45 (4) RJ-45 (4)    
General Specifications 
Video Support All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p
Resolution/Refresh Rate MultiView Receiver Dependenta
Required Source Impedence Video Out: 75 Ohms; Audio Out (if applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms
Required Destination Impedence Video In: 75 Ohms; Audio In (If applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms
  -A -S -SA -232 -SAP
Audio Support
Left/Right Summed or    SPDIF
(field config.)
- - - -
Line Level 600 Ohm Unbalanced - - - -
Serial Support -
Transmit Only
(data rates to 115kbps)
- - -
Cable Supported
Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP) 
or skew-free cable. Please see the "Recommended UTP" page for more detailed information.
Cascading Capability Yes, Video & Audio
Compliance CE; FCC Class A, IC Class A, RoHS
Power +5 VDC, Consumption 5 Watts Maximum
Temperature Tolerance Operating: 32 to 104°F (0 to-40°C)    Storage: -4 to 140°F (-20 to 60°C)    
Humidity Tolerance Up to 80% Non-Condensing
Enclosure Rack Mount Standard/Wall Mount Optional
Size Steel
Skew Compensation 1.2"H x 5.6"W x 4.5"D (3.0 x 14.2 x 11.4 cm)
Weight 1.4 pound (0.63 kg)