MultiView STx

Overview

Discontinued, please use the MultiView II STx as a replacement

Downloads for MultiView STx

 

Specifications

MultiView STx Model Specifications

Functionality
  -A -S -232 -SA -SAP
Video In HD15-F - - - -
Video Out - - - - -
Audio In 3.5mm (1/8") - - - -
Audio Out - - - - -
Serial In - - - - -
Serial Out - - - - -
UTP In - - - - -
UTP Out RJ-45 - - - -
General Specifications
Video Support All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p
Resolution / Refresh Rate MultiView Receiver Dependent
Required Source Impedence Video Out: 75 Ohms; Audio Out (if applicable) 600 Ohms maximum;
SPDIF Audio models: 75 Ohms
Required Destination Impedence Video In: 75 Ohms; Audio In (If applicable) 600 Ohms maximum;
SPDIF Audio models: 75 Ohms
  -A -S -232 -SA -SAP
Audio Support Left/Right Summed  or  SPDIF
(field config.)
- - - -
Line Level 600 Ohm Unbalanced
Serial Support - - - - -
Cable Supported Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP)
or skew-free cable. Please see the "Recommended UTP" page for more detailed information.
Cascading Capability No
Compliance CE; FCC Class A, IC Class A, RoHS
Power +5 VDC, Consumption 5 Watts Maximum
Temperature Tolerance Operating: 32 to 104°F (0 to-40°C)    Storage: -4 to 140°F (-20 to 60°C)
Humidity Tolerance Up to 80% Non-Condensing
Mounting Rack Mount Standard/Wall Mount Optional
Enclosure Steel
Size 1.38"H x 3.62"W x 4.38"D (3.5 x 9.2 x 11.1 cm)
Weight 0.6 pound (0.27 kg)
Skew Compensation Not Applicable on Transmitters
Warranty Three (3) Years