- View by Solution
- View by Family
- Mondo Matrix
- Infinea and HD-One
- Contact Us
- Support Library
Touch Control LCD Panel for the Mondo Matrix
The Mondo TC touch-screen controller is a simple yet effective way to control a Mondo Matrix crosspoint switch. The unit mounts in 3U of rack space (typically right above the master chassis of a Mondo) and lets users route signals using a 7-inch, 800x480 resolution touch-screen.
Setup is as easy as powering the TC unit and connecting to a Mondo's RS-232 port—that's it! From there the Mondo TC will self-configure to your Mondo. Users can custom label all inputs and outputs, switch audio and/or serial (4th pair) independently of video, setup and save routing configurations and even customize the background of the TC to their liking.
Integrators, if your end user needs a simple and cost-effective way to control a Mondo-based system, look no further than the Mondo TC.
Downloads for Mondo TC
- Auto configures to any size Mondo Matrix
- Route audio and/or serial independently of video
- Save configurations for (example) zone-based switching
- 7" touch-screen (800x480 resolution)
- Dual power inlets for redundancy (only one power cord provided with unit)
Takes up only 3U of rack space
Mondo TC Specifications:
|Screen Size:||7" (800x480), touch panel|
1 DB9F RS232 communication port.
(null modem DB9M-DB9M cable required)
2 Power inlet (redundant, hot swappable)
2 USB (not implemented at this time)
1 SD flash memory card slot (2GB max)
|Serial Protocol:||Fixed at 9600 baud, 8,N,1|
Operating: 32 to 104°F (0 to 40°C);
Storage: 26 to 104°F (-10 to 40°C)
|Humidity Tolerance:||Up to 80% noncondensing|
+12 VDC @ 0.5A max
Consumption: 6 watts maximum
Replace fuse with same type & rating:
250V, 2ASlow Blow, 5x20mm
|Size:||5.25 "H (3RU) x 19.0"W x 2.25"D (13.3 x 48.3 x 5.7 cm)(including rackmount)|
|Weight:||3.94 lb. (1.8 kg)|
2—12VDC power supplies
1—DB9M-DB9M Null Modem serial cable
1– 1GB SD flash memory.