Infinea DVI Receiver

Infinea DVI Receiver
Image Detail

Overview

Like the Infinea Transmitter, the Infinea receiver is available in two functionality categories. The base category supports extension of DVI video only while the –SAP category supports extension of DVI video, stereo audio and addressable duplex serial. While the standard cabling option for extension is UTP, both Multi-mode and single-mode fiber cabling is supported through optional plug & play fiber modules. Daisy chaining to additional receivers is standard on all receivers and when using this configuration, the input cabling option used for each receiver can be different from its output cabling option – another industry first! For example, a single source can be distributed to an unlimited number of displays around a campus using one single chain that includes SMF fiber from building to building and UTP cable within each building.

 

The addressable duplex serial capability enables independent control over each display device in a point to multi-point or multi-point distribution network. Each display device can be switched on or off and the settings of the display (e.g. brightness, contrast) can be programmed and updated remotely. The return path available with the bidirectional duplex capability can be used to check the settings and health status of each display or to receive data from interactive devices such as touch panels.
 

Downloads for Infinea DVI Receiver

Manual
Data Sheet
 

Description

Key Features

  • 1080P DVI support at 600ft/183m (UTP), 1640ft/500m (MMF) and 10 KM (SMF)
  • Standard UTP support with optional single mode and multimode fiber options
  • Daisy chain support for unlimited multi-point extension
  • Mix and match of cabling options within a daisy chain
  • Audio and addressable duplex serial support (-SAP series only)
  • Optional mount kits and mini-dense power supplies for rack-mount / rigid installations

Available Versions

Product Functionality Part number
Infinea DVI Receiver DVI Video 400R3392-03
Infinea DVI-SAP Receiver DVI Video, Stereo Audio, Addressable Duplex Serial 400R3421-03
Infinea MMF Fiber Module Set Multi-mode Fiber Transmitter/Receiver Pair 2211063-01
Infinea SMF Fiber Module Set Single-mode Fiber Transmitter/Receiver Pair 2211062-01
  1. US part numbers. Non-US part numbers may vary. Some product configurations may not be available in your region. Please contact your local distributor for more information.

Specifications

  Connectors Required
  Video -SA/-SAP
Video In DVI DVI
Video Out DVI DVI
Audio In - -
Audio Out - 4 Pin Phoenix
Serial In - 4 Pin Phoenix
Serial Out - -
UTP In RJ-45 RJ-45
UTP Out RJ-45 RJ-45
 
While all units feature UTP connectors as standard equipment,
fiber cable options take precedence
  General Specifications
Video Supported All VESA modes to (1600x1200), DVI, HDTV Modes including 1080p at reduced clock rate, 1080i & 720p.  DVI Single link at 1.65 Gbps
Resolution 1600 x 1200 (incl. 1080p) providing graphic card supports reduced clock rate
  Video -SAP
Audio Support   Stereo Audio
  Line Level 600 Ohm Unbalanced
Serial Support -
Addressable Duplex
(3 wire, fixed baud rate 9600)
Cable Supported (model dependent) Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP); Single Mode Fiber Optic (SMF); Multi-Mode Fiber Optic (MMF)
Maximum Distance
Total end to end over UTP: 600 ft. (183m)
Total end to end over Single Mode Fiber (SMF) Optic Cable: 32,808 ft. (10,000m)
Total end to end over Multi-Mode Fiber (MMF) Optic Cable: 1,640 ft. (500m)
Cascading Capability Yes
Compliance CE; FCC Class A, IC Class A, RoHS
Power +5 VDC, Consumption 5 Watts Maximum
Temperature Tolerance Operating: 32 to 104°F (0 to-40°C)    Storage: -4 to 140°F (-20 to 60°C)      
Humidity Tolerance Up to 80% Non-Condensing
Mounting Rack Mount Standard/Wall Mount Optional
Enclosure Steel
Size 1.2"H x 4.1"W x 5.5"D (3.1 x 10.4 x 14.0 cm)
Weight 1.0 pound (.45 kg)
Warranty Three (3) Years

 

Accessories

Part number Description
Power Supplies
2211045-01 Mini Dense Pack Rackmount Power Supply. Power 6-15 Infinea devices
8020069-03 U.S. Domestic Power Supply 5V 2.6A
8020077-02 Universal Power Supply 5V, 2.5A - Desk Style
8020101RC-00 Universal Power Supply 5V, 2.6 A - Hang Down Style
8020102RC-00 International Plug Kit for 8020101RC-00
Rack Mount Kits  
8310203-02 Rack Mt Kit (3) T4/T5 Transmitters or Infinea/AK/XR Receivers, 1U
8310204-02 Rack Mt Kit (6) T4/T5 Transmitters or Infinea/AK/XR Receivers, 2U
2211056-01 Filler Panel Kit for 8310203-02 or 8310204-02
2211054-01 Rigid Mt Bracket Kit for Infinea/AK/XR Receivers
2211008-00 Soft Mount Velcro Kit