- View by Solution
- View by Family
- Mondo Matrix
- Infinea and HD-One
- Contact Magenta
- Support Library
• Singlemode or multimode fiber
HDMI/DVI (with HDCP) fiber-optic based receivers
Two-port (VG-RX2-MM-HDMI) or four-port (VG-RX4-MM-HDMI) flexibility
Voyager HDMI/DVI receivers are available in two-port (VG-RX2-MM-HDMI) and four-port (VG-RX4-MM-HDMI) iterations, and accept video from any Voyager transmitter (HDMI, DVI, VGA or component). HDCP-protected video is supported and these receivers are rated for 1920x1200 uncompressed video signals, to distances of 6,600 feet over multimode fiber.
One multimode fiber-optic module is included with each unit. Additional modules can be ordered to daisy-chain Voyager receivers (increasing distribution options). Up to 10 (or more, depending on distance and the specific type of fiber being used) Voyager receivers can ultimately be daisy-chained together.
When using an HDMI source, embedded HDMI audio is also sent through the Voyager transmitter to the receiver and outputted to a display via a HDMI connector.
The new Voyager HDMI-SRx module can be used with both two and four-port cores. This module takes video from any Voyager transmitter and outputs one of 29 different stored video resolutions. A 30th resolution can be custom configured by the user. When operating in its default mode, and connected with a display, the SRx scaling receiver will automatically read EDID information and configure itself in order to output the screen’s preferred resolution.
Singlemode fiber optic modules supporting longer distances (4KM and 30KM) are also available from Magenta.
A power supply is also included.
Downloads for HDMI/DVI (with HDCP) fiber-optic based receivers
• Singlemode or multimode fiber
• SRx-HDMI (optional) module scales video to one of 30 different resolutions
• Two-port (VG-RX2) and four-port (VG-RX4) functionality
• Uncompressed multi-format video at 1920x1200
• Daisy-chain capability with full bidirectional signal support
• Advanced EDID management and HDCP compliance
• Supports embedded HDMI audio
• Units ships with one (1) multimode fiber optic SFP module
|VG-RX2-MM-HDMI||Two-port HDMI Receiver with HDCP||2320001-01|
|VG-RX4-MM-HDMI||Four-port HDMI Receiver with HDCP||2320011-01|
|VG-RX2-MM-SRx-HDMI||Two-port Scaling HDMI Receiver with HDCP||2320002-01|
|VG-RX4-MM-SRx-HDMI||Four-port Scaling HDMI Receiver with HDCP||2320012-01|
|DC input power||Provided by the CORE module. However, power consumption of this module alone is approximately 0.5 watts.|
Video output formats:
• Maximum resolution supported = 1080p or 1920x1200.
• Maximum color-depth = 24 bits per pixel (8 bits per color).
• Maximum refresh rate = 60Hz @ 1920x1200.
This module automatically provides embedded HDMI-audio (if audio is available at the source AND if the EDID in the sink or display device supports it).
* For analog-audio output, please use the ISA auxiliary module.
|Connectors||(1) HDMI-output, (1) CORE docking connector|
|EDID/DDC||This module supports the EDID/DDC connections on the HDMI connector.|
|HDCP||Version 1.1. Classification: HDCP Repeater Device|
|CEC||The HDMI "CEC" interface protocol is not currently supported. Note: The hardware is capable. A future firmware upgrade may enable this functionality.|
Operating temperature: 32 to 104°F (0 to 40°C).
Storage temperature: -4 to +140°F (-20 to +60°C).
Humidity: 80% RH, non-condensing.
Steel (0.040”/1mm thick).
Powder-coat black paint, white epoxy graphics.
Assumes a typical 2-module configuration consisting of
VIDEO + CORE modules, docked together:
1.75"(4.45cm)H x 5.5"(13.967cm)W x 5.25"(13.33cm)D
Weight: 1.4lbs (.635kg)