1x9 MultiView 9D (Supports all MultiView-‘X’) A

MultiView 9D Distribution Amplifier
Image Detail

Overview

A key component for point to multi-point applications, the MultiView 9D splits the UTP output from any MultiView transmitter into 9 UTP outputs that can be connected to MultiView receivers, daisy chain of receivers, distribution amplifiers, or matrix switchers. The MultiView 9D supports all MultiView-‘X’ functionality1 and sustains the resolution and distance capabilities of the receivers when splitting the UTP signals.

Downloads for 1x9 MultiView 9D (Supports all MultiView-‘X’) A

Manual
Data Sheet
9D Rear View
 

Description

Key Features

  • Splits one UTP input into 9 UTP outputs
  • Supports all MultiView-‘X’ functionality versions
  • Compatible with all MultiView transmitters, receivers, distribution amplifiers and matrix switchers
  • Enables extension of 1920x1200 resolution video from 1 to 2000ft/609m
  • Optional mount kits and mini-dense power supplies for rack-mount / rigid installations

Available Versions

Product Functionality Part number
9D 1 x 9 Distribution Amplifier for MultiView  221R1029-01

  1. All serial functionality is limited to transmit only when passed through a MultiView 9D.
  2. Maximum distance capability is determined by receivers distance specification.
  3. US part numbers. Non-US part numbers may vary. Some product configurations may not be available in your region. Please contact your local distributor for more information.

Specifications

  Connectors Required
Signal In (1) UTP From Transmitter
Signal Out (9) UTP to Receiver or to Cascade to Additional 9Ds
  General Specifications
Video Support MultiView Transmitter/Receiver Dependent. All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p
Resolution/Refresh Rate To 1920x1200 (MultiView Receiver-dependent)
Required Source Impedence Required Source Impedence
Required Destination Impedence Required Destination Impedence
Audio Support Line-level combined L&R, stereo, or SPDIF digital audio
Serial Support Uni-directional RS232 to 19.2k baud
Cable Supported Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP)
Compliance CE, FCC (16x16) / FCC (8x8)
Power 5V regulated, + 3%, < 1.75A (power supply included with 9D)
Temperature Tolerance Operating: 32 to 104oF (0 to-40oC)    Storage: -4 to 140oF (-20 to 60oC)
Humidity Tolerance Up to 80% Non-Condensing
Mounting Rack Mount Optional
Enclosure Steel
Size 1.75” H x 8.1”W x 6.5” D (4.45 x 21 x 16.5 cm)
Weight 2.2 lbs. (1.0 kg)
Skew Compensation Not Applicable
Warranty Three (3) Years