HDMI/DVI (with HDCP), audio and serial fiber-optic based transmitters

Two-port (VG-TX2-MM-HDMI-ISA) or four-port (VG-TX4-MM-HDMI-ISA) flexibility

Overview

Available in two-port (VG-TX2-MM-HDMI-ISA) and four-port (VG-TX4-MM-HDMI-ISA) these Voyager HDMI transmitters accept DVI or HDMI video through an HDMI input. HDCP, embedded HDMI audio and two-way (duplex) RS-232 are also supported. 1920x1200 uncompressed video signals can be sent to distances of 6,600 feet over multimode fiber. One multimode fiber-optic module is included with the unit. Additional modules can be ordered to cascade to a second Voyager transmitter or to distribute signals to multiple Voyager receivers. Singlemode fiber optic modules supporting longer distances (4KM and 30KM) are available from Magenta. A power supply is also included.

Downloads for HDMI/DVI (with HDCP), audio and serial fiber-optic based transmitters

http://www.magenta-research.com/files/product-files/5310238-01-02_Voyager_UG_v1.01_0.pdf http://www.magenta-research.com/files/product-files/vg-tx4-hdmi-isa.jpg

Two-port (VG-TX2-MM-HDMI-ISA) or four-port (VG-TX4-MM-HDMI-ISA) flexibility

http://www.magenta-research.com/files/product-files/5310238-01-02_Voyager_UG_v1.01_0.pdf

http://www.magenta-research.com/files/product-files/vg-tx4-hdmi-isa.jpg

Description

• Two (VG-TX2) or four (VG-TX4) duplex fiber output ports
• Uncompressed multi-format video at 1920x1200
• Multi-format audio and RS-232
• Distance range of up to 18.75MI/30KM determined by receiver
• Singlemode or multimode fiber support
• Advanced EDID management and HDCP compliance
• Local video output (HDMI)
• Unit ships with one (1) multimode fiber optic SFP module

Product	Functionality	Part number
VG-TX2-MM-HDMI-ISA	Two-port HDMI Transmitter with HDCP, audio and duplex RS-232	2310006-01
VG-TX4-MM-HDMI-ISA	Four-port HDMI Transmitter with HDCP, audio and duplex RS-232	2310016-01

Specifications

Item	Description
DC input power	Provided by the CORE module. However, power consumption of this module alone is approximately 0.5 watts.
Video Support	Video input formats (video input port): • Maximum resolution supported = 1080p or 1920x1200. • Maximum color-depth = 24 bits per pixel (8 bits per color). • Maximum refresh rate = 60Hz @ 1920x1200. Video output formats (local output port): The local port is essentially a direct copy of the video input port. However, the output video color-space is always RGB regardless of the input video color-space.
Audio Characteristics	This module recognizes all 8 channels (if present) of embedded HDMI audio, passing them through the system to the receiver.
Connectors	(1) HDMI-input, (1) HDMI-output, (1) CORE docking connector
EDID/DDC	This module supports the EDID/DDC connections on the HDMI connectors.
HDMI	Version 1.3b
HDCP	Version 1.1. Classification: HDCP Repeater Device
CEC	The HDMI “CEC” interface protocol is not currently supported. (Note: The hardware is capable. A future firmware upgrade may enable this functionality.
Environmental	Operating temperature: 32 to 104°F (0 to 40°C). Storage temperature: -4 to +140°F (-20 to +60°C). Humidity: 80% RH, non-condensing.
Enclosure	Steel (0.040”/1mm thick).
	Powder-coat black paint, white epoxy graphics.
Serial Interface	RS232 standard serial interface. Reflects DCE pinout standard. Signals: TXD, RXD, RTS, CTS, DSR, DTR, DCD and RI. Speeds: 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 Baud. Format: 8 data. 1 or 2 stop bits. no parity bit. Flow control: Hardware and software flow-control is available, configurable on/off. Connector: DB9-Female, w/4-40 standoffs. Note: Speed and data format are software-configurable via MAGui. The ISA hardware is capable hardware and software (Xon/Xoff) handshaking. However, this capability is not yet enabled by the firmware. Check with Magenta Research for applicable firmware updates.
Audio interface	Discrete Left and Right line-level audio. This module can function as an input (for TX) or output (for RX) device. The audio signal direction is under software control, and is selected automatically by the type of CORE module being used. Audio-input mode (when used with VG-TX2 CORE): Input voltage: 2V peak-to-peak, maximum. Input impedance: >= 10K ohms. Input coupling: AC (capacitive). Input sample rate: 48KHz Input frequency response: 20-20KHz, (@-3dB). Audio-output mode (when used with VG-RX CORE): Output voltage: 2V peak-to-peak, maximum.Output impedance: <= 100 ohms. Output coupling: AC (capacitive). Output sample rate: 48KHz Output frequency response: 20-20KHz, (@-3dB). Connector: 3.5mm (1/8”) stereo-phono type jack.
System Size	Assumes a typical 3-module configuration consisting of: VIDEO + CORE + ISA modules, docked together: 1.75"(4.45cm)H x 7.75"(19.68cm)W x 5.25"(13.33cm)D Weight: 2.2lbs (.997kg)
MTBF	100,000 hours.

Active Products